It's been way too long since I posted. And there are several good things happening that I need to write about! Sorry for the long silence, but things are moving fast and I am trying to keep up.
I think the last you heard from the woodgas project, I had gone to visit Wayne Keith in Alabama and studied his truck. I wanted to glean what I could and apply some of it to my own truck. Wayne was gracious enough to put me up for the night and give me a thorough tour of his trucks and his farm. While I was down there he mentioned that Mother Earth News had been pestering him for a set of plans, to go with their upcoming article on his woodgas truck in the spring. I told him that he really could do well to publish his stuff, it would help out the DIYers and get more Wayne-style trucks on the road. Then I headed home and started thinking about my truck and all the changes I was going to have to make, to be more like Wayne's trucks.
About a month later, I got a call from Wayne. After we talked a bit, he came down to business. He was ready to publish his plans, and he wanted my help. In particular, he needed a website with premium content, and a format for his plans to be sold in. I was surprised and pleased to get the call. I immediately accepted, and went to work on the website, and outlined a general plan of attack for Wayne.
So long story short, I am still working on the website two months later, and I will post a link to it soon. Wayne is busy building a new truck and carefully documenting all the parts of it with photos and video. He is going to be publishing his plans in paper form sometime this summer, but preorders will be available soon.
Meanwhile the woodgassers are thinking about spring, and when we should plan a meetup. I started gently nudging the members to get off the dime and decide when we are going to do this. As is often the case, the nudger gets the job for himself. So I am now the treasurer and contact person for the event, and have been coordinating some of the efforts involved. It's not a huge gathering, but there are around 20 folks coming to Argos IN on May 18-20th, and it will be open to the public on Saturday. As treasurer I have been getting a lot of checks in the mail.
So all that is perspective for what the UPS man brought to my door this morning:
One of the woodgassers, Brian Smith is also VP of Manufacturing at Goop! So he sent all this along with his contribution. Wow! That's a lot of hand cleaner....
Quick plug - I have to say, I do use a lot of hand cleaner (usually Fast Orange), as does anyone working on cars or welding steel. You get pretty grimy. I can't say as I have tried enough of them to tell a real difference. This one works at least as good as the Fast Orange I've been using. They advertise that it's effective on clothes too, which Fast Orange is not. There's original and orange-citrus. I tried some of both, and it works great. I guess I won't be buying any hand cleaner for a while... But when I do, it'll be Goop, because I might as well support a fellow woodgasser, and the product seems to work well. I'll let you know in six months how the supply is holding out!
So in all the shuffle, what happened to my truck?
The short answer is I have been too busy to do anything with it. I haven't touched it since I got back from Wayne's in December. BUT! I am about to start back on it again. I am actually going to drive it down to Alabama, on gasoline. Wayne and I will work on both his new truck and my truck, getting them both finished in time for the woodgas meet. I'd like to drive home on woodgas. So I want to have as much ready as possible before that happens. So I will be working on little things to get ready and make the time down there as productive as possible. I will be posting regular updates once I get back to work on the truck.
So, that's enough for today. It's still not everything I've been doing - just the highlights.
Till next time!
Showing posts with label hobbies. Show all posts
Showing posts with label hobbies. Show all posts
Thursday, February 16, 2012
Saturday, March 26, 2011
Arduino class
I have been taking a basic electronics class lately. In particular, I have been introduced to a microcontroller known as Arduino. This is really a whole platform, complete with programming environment and easy-to-use interface. This is a dream setup for prototyping in electronics; get an Arduino board, construct a physical circuit, and write some code. Bing! It's uploaded and running. Pictured is a part of a project, the Gasifier computer. I am working out a program for controlling a biomass gasifier; it will read input from an O2 sensor and make adjustments to the fuel/air mixture valve, as well as controlling the spark advance and giving a digital readout of several temperature and pressure sensors. All that from a chip that costs $4 by itself. The Arduino development board pictured cost about $30, and the software is free.
I have bumped into Arduino once before, as the basis for the MPGuino I assembled for the Geo Metro.
Arduino is based on the C language, all the operators work the same way. Arduino gives you a few built in libraries, for functions like digitalWrite( ) or Serial.read. I haven't done any programming before, so this has been a fun challenge. It's also an exercise in precise formatting; a missing bracket or semicolon in the wrong place and the code refuses to compile, or worse it may compile fine, but won't run as expected. I may post the code for the Gasifier computer once I get it right.
I mentioned an electronics class. Walt Baldwin has been gracious enough to teach an Arduino class at the Kentucky Coffeetree Cafe on Tuesdays. He has been showing us the rudiments of programming, drawing on his background in engineering and software design. Several students and professors from KSU have been attending the class. As you may recall from my previous post, Wayne Keith has been up to KSU on several occasions. As it turns out, some of my fellow students were involved in that event, and are very interested in gasification technology. One sent me a boatload of photos of Wayne's truck. Huh! So it's a small world after all.
Thursday, August 12, 2010
Imbert gasifier footage from WWII
Cool video from bioenergyken.
video showing actual Imbert gasifier - design, production and operation. Appears to be filmed by the manufacturer, Imbert.
Youtube description:
'Sweden was short of oil during WWII. There were some cars which ran with the syngas from biomass gasifier.'
Would love to get a transcription of the Swedish dialog here. [EDIT: added link to transcription!]
video showing actual Imbert gasifier - design, production and operation. Appears to be filmed by the manufacturer, Imbert.
Youtube description:
'Sweden was short of oil during WWII. There were some cars which ran with the syngas from biomass gasifier.'
Would love to get a transcription of the Swedish dialog here. [EDIT: added link to transcription!]
Monday, February 8, 2010
First Castings
They aint pretty, but they're the first castings, so they deserve honorable mention.
These are core plates, purpose a little vague at this point, but easy to make the patterns. I also
haven't got any decent scrap yet, so the melt took longer than I expected, since I had to
scrounge up lots of little pieces (liscense plates, aluminum canteen, screen door handle, etc).
Yes, another video.
Here is the finished product:
Sunday, February 7, 2010
Blacksmithing and Metalcasting
Blacksmithing as you probably know is the shaping of hot metal using a hammer and anvil. It is a very old craft and one that I particularly enjoy, although I'm not very good at it.
Metal casting is another way to shape metal, by melting it at high temps and pouring it into a mold. I am trying to learn this craft also, and it will allow me to make some important metalworking tools that would otherwise be very expensive. I.E. a metal lathe, shaper, milling machine, drill press, and related "accessories". The series of books I am following is Dave Gingery's How to Make a Machine Shop from Scrap. So the first step is to build a charcoal foundry. I have done so according to the books directions, and here is a video of the first fire, curing the refractory lining.
More metalcasting pics
As the furnace cured, I went to the blacksmith shop and made some tongs for the crucible (pot of metal).
I also made a skimmer.
Here's a video of me blacksmithing the tongs:
Metal casting is another way to shape metal, by melting it at high temps and pouring it into a mold. I am trying to learn this craft also, and it will allow me to make some important metalworking tools that would otherwise be very expensive. I.E. a metal lathe, shaper, milling machine, drill press, and related "accessories". The series of books I am following is Dave Gingery's How to Make a Machine Shop from Scrap. So the first step is to build a charcoal foundry. I have done so according to the books directions, and here is a video of the first fire, curing the refractory lining.
More metalcasting pics
As the furnace cured, I went to the blacksmith shop and made some tongs for the crucible (pot of metal).
I also made a skimmer.
Here's a video of me blacksmithing the tongs:
Subscribe to:
Posts (Atom)